BSOD Errors, aka the Stop errors, are symptoms of a computer suffering from a serious problem to an extent that it has to stop immediately. And if you are looking for a solution to fix BSOD Error NPFS_FILE_SYSTEM (Error Code 0x00000025), apply all the solution explained below to resolve it.
If the error appears on your screen is caused by a software failure, you may be lucky to get a glimpse of the error code. Otherwise, you can only say the PC suddenly stopped because of a BSOD error if it was running slow, crushed suddenly after restarting and took longer time to boot.
To fix this error, you need to know the following:
Part 1: Causes of BSOD Error NPFS_FILE_SYSTEM (Error Code 0x00000025)
Part 2: The solutions to BSOD Error NPFS_FILE_SYSTEM (Error Code 0x00000025)
Part 1: Causes of BSOD Error NPFS_FILE_SYSTEM (Error Code 0x00000025)
It shouldn’t surprise when we talk of “causes” because a computer is a combination of hardware and software. Just one faulty hardware is likely to cause adverse driver issues and thus cause BSOD error.
So, what caused the error coded 0x00000025 appearing on that blue screen of death?
- Corrupt NPFS file system in the system partition. NPFS file is a system file found in the Windows NT operating system. It’s used for storing and retrieving files in a hard disk. When this file is corrupt, retrieving files is impossible and is likely to cause Stop errors.
- Malware infection or virus on system files or hardware is another cause.
- If there is a problem with memory space in the partition disk or the space in the running disk low, BSOD error can appear on your screen.
- Issues in computer drivers are another cause.
Part 2: The solutions to BSOD Error NPFS_FILE_SYSTEM (Error Code 0x00000025)
Since you cannot pinpoint the exact cause of this error, it’s important to start with the quick fix solution before applying the much-detailed ones. After applying each quick-fix solution, restart the computer to see if the error is solved.
Try these other simple methods:
- Scan the computer for virus
A virus attack on files, folders or programs in your computer is probably the cause of this Stop error. Use an antivirus to run a scan and resolve issues caused virus.
- Check the memory space of the disks
Its difficulty for a computer to successfully boot when the operating system is operating under strained space. If the space is low- below the recommended 20%, expand the memory space by deleting files and folders that are unnecessary. Alternatively, buy bigger memory chips or install a disk with bigger volume and restart the machine.
- Uninstall unnecessary installed software
Installed software can be incompatible with hard drives in the operating system. This incompatibility can cause the computer to stop immediately without an alert. Uninstall non-essential third party software like antivirus, game players and even programs.
To uninstall this software, go to the search box and type Control Panel. In the Control Panel, click Uninstall a program and a long list of the installed programs will be displayed on the Programs and Features window.
I hope you can remember the ones you installed before the BSOD error occurred. Right-click on the software then, click the Uninstall button. Follow the prompts to uninstall and reboot the computer.
- Restart the computer in Safe Mode
Restarting the computer in Safe Mode can quickly help fix 0x00000025 error. This is how to restart it:
- Go to the Start menu and select Settings.
- On the Setting page, go to the Update & Security menu and then click the Recovery option.
- Select Advanced startup and click Restart now below it.
- Follow the next prompts and select Troubleshoot. On the Troubleshoot, tap on the Advanced Options and then click Startup Settings.
- From the restarting option highlighted on the computer, select Enable Safe Mode and tap the Restart button.
If the BSOD error still appears on the screen, these other solutions will solve it well.
Solution 1: Restore deleted files
If your computer system has been attacked by the virus, there is a possibility of some files being deleted, blocked, or damaged. Restoring these files will revert the computer to its previous state of operation and can be the solution to the problem.
To recover files deleted by a virus attack, start by clicking the “Start” button. Secondly, type CMD in the search bar and a Command Prompt will pop up on your computer.
Now press Enter to run the Command Prompt and then type “attrib –h –r –s /s /d driver_name\*.*”. Your computer will now recover deleted files.
Solution 2: Update outdated drivers
Drivers are hardware units the maintain your device functional. To fix NPFS_FILE_SYSTEM error, updating the drivers is recommended. Whether running on Windows 10/8.1/8 or 7, use the Device Manager option and follow the process below:
Step 1: Go to the Device Manager and click on it. This will open a long list of device drivers.
Step 2: Double click on the suspected device drivers to see the devices in it.
Step 3: Right-click the selected device and choose Update Driver. From the two options – Search automatically for updated driver software and Browse my computer for driver software, Ichose the latter. The Windows will automatically search for the drivers that require updating and then fix it.
Solution 3: Uninstall and Reinstall the Windows Operating System
Even though the process slightly differs for Windows 10/8.1/8/7/Vista and XP, follow this step-step guide to resolve this problem.
Note: It’s important to protect your data before beginning to uninstall the operating system.
Step 1: Copy/backup all important files in your computer
Step 2: Click the Start button> Turn Off the Computer and then select Restart. Press the suggested key to interrupt the starting process.
Step 3: Look for the First Boot Device option and press Enter.
Step 4: Now on the displayed screen, select CDROM/DVD and continuously press Esc key until the BIOS screen is displayed again.
Step 5: Use the Windows installation CD to restart the computer by inserting into the drive.
Step 6: Choose Install Now option and then click I Accept the License Terms and click the Next button. Select the partition with the largest volume from the choices displayed.
Step 7: Select the Advanced option and from the choices now given, choose to reformat your drive. At this point, you’ll be prompted to enter the product key. After you are done, follow the instructions given on the screen to finalize the uninstall and reinstall process.
Besides, you can also try the methods on this page.
Conclusion
If you wanted to learn how to fix BSOD Error NPFS_FILE_SYSTEM (Error Code 0x00000025)on your screen, you have all the option at your figure tips now. Stop errors are sometimes easy to fix, however, on a bad day, it may not be as easy as many think.